In the CT180 wireless conference microphone system, when the main unit and all units are powered on, some or all wireless units may experience issues with controlling the switch._复制
Focus on checking the connection status of the four antennas on the main unit. It is essential to use the original antennas provided with the device. The antennas should be positioned at a height of more than 1.8 meters, with no obstructions within 0.5 meters around the antennas. Maintain a distance of more than 5 centimeters between each antenna, and ensure that the distance between the antennas and the wireless units is within 60 meters without any obstructions in between. The D antenna is responsible for the transmission and reception of the switch control signals for the wireless units, with a signal frequency of approximately 450 MHz. Pay attention to any external device interference in this frequency band to ensure a clean wireless signal environment for normal use.
In the CT180 wireless conference microphone system, when the main unit and all units are powered on, some or all wireless units may experience issues with controlling the switch.
Focus on checking the connection status of the four antennas on the main unit. It is essential to use the original antennas provided with the device. The antennas should be positioned at a height of more than 1.8 meters, with no obstructions within 0.5 meters around the antennas. Maintain a distance of more than 5 centimeters between each antenna, and ensure that the distance between the antennas and the wireless units is within 60 meters without any obstructions in between. The D antenna is responsible for the transmission and reception of the switch control signals for the wireless units, with a signal frequency of approximately 450 MHz. Pay attention to any external device interference in this frequency band to ensure a clean wireless signal environment for normal use.
